Back
Back
Keep typing for more specific results...

Kenmore Washer Hardware

Kenmore Appliance Parts

YOUR TRUSTED CHOICE

  • Genuine Brand Name Part
  • Fast Delivery
  • Expert Customer Support

Popular Kenmore Washer Hardware

Agitator Bolt – Part Number: WP358237
$5.95
In Stock
Agitator Bolt
Part #: HD11741866
Manufacturer Part #: WP358237
This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".
Fixes these symptoms
  • Leaking
  • Marks left on clothes
  • Spinning Issues
  • See more
Washer Washplate Screw – Part Number: W10752187
$6.95
In Stock
Washer Washplate Screw
Part #: HD10064547
Manufacturer Part #: W10752187
Fixes these symptoms
  • Spinning Issues
  • Will not agitate
Clamp Assembly – Part Number: ACA56078801
$19.95
In Stock
Clamp Assembly
Part #: HD3530864
Manufacturer Part #: ACA56078801
Fixes these symptoms
  • Leaking
Single Front Panel Cip – Part Number: W10854425
$14.95
In Stock
Single Front Panel Cip
Part #: HD11731288
Manufacturer Part #: W10854425
This part is the replacement single front panel clip for your dryer. It is made of metal and is approximately 2 inches long and ¾ inch wide. The front panel retainer clip is what holds the front panel on to the dryer. If the clip is damaged or missing, or if the front panel appears loose, you may need to replace the clip. This part is sold individually and is an authentic OEM part.
Fixes these symptoms
  • Door won’t close
  • Noisy
Washer Washer – Part Number: WP3949550
$11.95
In Stock
Washer Washer
(1)
Part #: HD11742027
Manufacturer Part #: WP3949550
This part goes on the agitator retaining bolt.
Fixes these symptoms
  • Leaking
  • Will not agitate
Hex Head Bolt – Part Number: DC60-40137A
$11.95
On Order
Hex Head Bolt
Part #: HD4205366
Manufacturer Part #: DC60-40137A
This part is used for the shaft on rear of the tub. Sold individually.
Washplate Bolt – Part Number: W10772621
$5.95
In Stock
Washplate Bolt
Part #: HD10067065
Manufacturer Part #: W10772621
Sold individually.
Fixes these symptoms
  • Will not agitate
CLAMP – Part Number: 134616300
$40.95
In Stock
CLAMP
Part #: HD2349238
Manufacturer Part #: 134616300
Fixes these symptoms
  • Leaking
Clamp Assembly – Part Number: 4861ER2001J
$34.95
In Stock
Clamp Assembly
Part #: HD3524029
Manufacturer Part #: 4861ER2001J
Fixes these symptoms
  • Leaking
Suspension Spring Retainer – Part Number: WPW10145155
$5.95
In Stock
Suspension Spring Retainer
Part #: HD11749057
Manufacturer Part #: WPW10145155
This is a replacement suspension spring retainer for your washer. The retainer holds the suspension spring in place while the washer is operating. If you notice movement, or an unusual noise or shaking of your washer when it is in use, it could mean that the suspension spring has been disconnected because of a broken or missing spring retainer. You will find the suspension spring retainer at the bottom of the tub assembly. To replace the retainer, use a pair of pliers to disconnect the suspension spring from the chassis mount to relieve the tension. Then, remove the spring from the retaining clip, and remove the retaining clip from the bottom of the washer. Attach the new retaining clip to the bottom of the washer, reattach the spring, and stretch it slightly so it can connect to the chassis. This part is sold individually.
Fixes these symptoms
  • Shaking and Moving