Power Tool Parts
YOUR TRUSTED CHOICE
- Genuine Brand Name Part
- Fast Delivery
- Expert Customer Support
Shop By Brand
View More
Popular Power Tool Parts
$13.95
In Stock
This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The tires simply stretch onto the pulleys. No tear down of any parts is needed.
... Read more
$23.95
In Stock
This is an authentic replacement part manufactured for use with Milwaukee impact drivers. The special handle assembly is used to house the switch assembly and motor. This handle assembly includes both sides and is available as an individual replacement part. Please see model diagram for associative parts.
$5.95
In Stock
Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead, brush spring and bracket attached. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
... Read more
No Longer Available
Genuine Dewalt replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
... Read more
$5.95
In Stock
Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead, brush spring and bracket attached. Two brushes are needed for the tools shown below. • Worn brushes are often the cause behind a a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes be sure to also inspect your armature for burns, cracks, or other damage which are indication of a larger motor problem.
... Read more
No Longer Available
This is a brush box assembly designed for various sander models. Brush boxes are essential components that house carbon brushes responsible for transferring electricity from the motor to the sanding pad. When the carbon brush assembly wears out, it can no longer efficiently transfer electricity, causing the sander to stop working. This brush box assembly includes the carbon brush, its housing, and the necessary wiring. Replacing the brush box assembly is a straightforward process, requiring only a screwdriver and a set of pliers. Begin by disconnecting your sander from its power source, whether it is a battery or a wall outlet. Next, remove the screws securing the main housing of the sander and locate the brushes inside. Use a set of pliers to disconnect the wire from the old brush and a flat-head screwdriver to lift the old brush out of its slot. Insert the new brush box assembly into the slot and connect its wires. Finally, reattach the sander outer housing and secure it with the screws.
... Read more
No Longer Available
This is an original part from Craftsman for nailers and staplers. This part produces air pressure to force the driver in the direction of the fastener. You will need a allen wrench set, adjustable wrench and a screwdriver to replace this part. This part is made of plastic and sold individually.
Fixes these symptoms
- Driver won't return
- Leaks air from top
- Won't fire
- See more
No Longer Available
This is an Original Manufacturer Sourced replacement part used on Dewalt Angle Grinders. This part is made out of Metal and it is Sold Individually. The purpose of this Hex Hole Flange Nut is to hold the Grinding Wheel to the Spindle Shaft. You would need Hex Wrench to secure this part.
No Longer Available
This Genuine OEM carbon brush is an essential replacement part designed for use with a variety of DeWALT and Black & Decker saws. Sold individually, this high-quality component is made to conduct electrical current within the motor, enabling efficient power transfer and tool performance. Over time, carbon brushes naturally wear down due to friction and electrical contact, which can lead to intermittent motor issues or failure to start.
Measuring 3/4 inch in length, 1/2 inch in width, and 1/4 inch in thickness, this brush is built to original specifications for a precise fit. When replacing carbon brushes, it’s important to also inspect the motor’s armature for signs of burns, cracks, or other damage, which may indicate a more serious issue. A hex key or screwdriver may be required for installation, depending on your tool model.
... Read more
Fixes these symptoms
- Won't turn on
No Longer Available
This is a Genuine Manufacturer Sourced replacement part used on Dewalt Angle Grinders. The purpose of this Clamp Washer is to provide support for the Grinding Wheel to the Spindle Shaft. This Clamp Washer is made out of Metal and it is Sold Individually. You would need Hex Wrench to replace this part.