Magic Chef Refrigerator Thermostats

If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.

This thermally operated switch, controls the compressor circuit and therefore the temperature of the fresh food compartment.

This part acts as a safety device against over-heating in case of mechanical failure.

This cold control thermostat helps maintains the proper temperature in the refrigerator.

This is a temperature sensing mechanism. It can sense the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted from the coils.

This thermostat helps regulate the temperature of the freezer section.

This refrigerator defrost thermostat will cut out at 80 degrees Fahrenheit and kick back when the temperature drops to 15 degrees Fahrenheit.

This cold control thermostat has a temperature range from 37 degrees Fahrenheit to 27 degrees Fahrenheit and a capillary length of 29 iches. This cold control thermostat cycles on and off regularly to keep your refrigerator cold.

This thermostat cuts out at 38 degrees Fahrenheit. The thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.