Saw Parts
YOUR TRUSTED CHOICE
- Genuine Brand Name Part
- Fast Delivery
- Expert Customer Support
Popular Saw Parts
$13.95
In Stock
This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The tires simply stretch onto the pulleys. No tear down of any parts is needed.
... Read more
$5.95
In Stock
Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead, brush spring and bracket attached. Two brushes are needed for the tools shown below. • Worn brushes are often the cause behind a a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes be sure to also inspect your armature for burns, cracks, or other damage which are indication of a larger motor problem.
... Read more
$17.95
In Stock
This is a genuine Milwaukee replacement part. It is sold individually for the Milwaukee Sawzalls listed below. The Shoe Assembly helps guide the blade where you want to cut. It is adjustable by pulling down on the 31-52-0090 Shoe Release Lever, for use of longer or shorter blades. The foot pivots for cutting angles. The saw should not be used without this part or it could damage the saw. Part is easily removed and installed with the lever release.
... Read more
$5.95
In Stock
This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The tires simply stretch onto the pulleys. No tear down of any parts is needed.
... Read more
$5.95
On Order
This is a genuine OEM sourced replacement part designed for use with Milwaukee sawzall reciprocating saws. This shoe pin secures the shoe retainer. It is made of metal and it is sold individually. To complete this repair you would need a screwdriver and pliers.
$5.95
In Stock
This is a genuine Milwaukee replacement part, it is sold individually. These sleeve bearings are installed on the Blade Pulley Axles on the Milwaukee Bandsaw models shown below. They fit inside of the Blade Pulleys When the blade on the bandsaw is not tracking properly, it may be time to replace them. There are four of these on each tool. This also would be a good time to replace the 45-69-0010 Blade Pulley Tires, as they also aid in blade tracking.
... Read more
$29.95
In Stock
This is an on/off switch for various models of circular saws. This switch is located near the main handle assembly of the saw and responsible for toggling the power to the saw. This switch is made of durable black plastic and features a single toggle that the user presses to turn the saw on. Over time and through extended use, this switch can wear out and fail, at which point it needs to be tested with a multimeter, and/or replaced. To remove this switch for testing and replacement, you will need to first disconnect it from power, and then disassemble one half of the main handle with a drill or screwdriver. Once the securing screws are removed, you can pull the plastic shell of the handle off to expose its internal components. Pull the switch out of the housing and remove the wires connected to it, noting their location for the future installation. With the switch removed, you can test it with a multimeter to see if it has continuity, and if it does not, it will need to be replaced. With the new switch in-hand, install the wires with a screwdriver, starting with the motor wires (usually black first, and then white) and then the cord wires. Now place the switch into the housing and make sure the switch and wires are all flush, before reassembling the handle and securing it together.
... Read more
$5.95
In Stock
This manufacturer sourced replacement part is designed for use with Milwaukee band saws. It includes one (1) carbon brush with lead wire and a spring attached. Carbon brushes are commonly replaced item on power tools Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time. You would need a screwdriver and pliers to complete this job. • First remove screws holding the cover together • Remove the housing to gain access to armature and brush holder • Remove the old brush • Install the new brush • Reassemble and test your tool
... Read more
$6.95
In Stock
This is an original Milwaukee replacement item designed for use with circular saws. It is supplied by original equipment manufacturer. This item helps to secure saw blade to the spindle/shaft. This is a metal outer flange and it is sold individually. Please note you would need a wrench to remove the blade bolt when replacing a flange.
$16.95
In Stock
This rear guide roller kit is an OEM item which is specially designed for Milwaukee band saws. The purpose of this component is to support and guide the blade. It is an identical replacement for a missing or a faulty item that was installed on a new unit. Note, this is the rear guide, the front guide is sold separately. Make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. This high-quality kit includes one durable metal roller and two screws to secure it. To perform this repair you will need a screwdriver set to remove the pulley and the cover.
... Read more